Past Events

Comparison between MIL HBDK -217 FN2 and 217 Plus in Reliability Prediction

Techlabs is the leading training solutions provider for engineering students and working professionals. We offer supplementary training packages in niche areas of expertise that will equip you with skills that are not only in great demand but will also allow you to rethink your career path, opening up innovative entrepreneurial avenues for you. Techlabs takes the conventional syllabus-based theoretical training to a new level of practical application-based solutions

Presented by : N. Aravinth – Sr. Application Engineer- Reliability

About this Webinar:

The failure rate models of 217Plus are more than updated MIL-HDBK-217 models. They are restructured to be more accurate by enhanced approaches to accounting for environments, for quality, and for cycling effects on reliability. The methodology also allows users to combine its models with their own experience data in a Bayesian type approach.

Please Register through mail“

Student Training

Industrial Training Workshop on Virtual Instrumentation using NI LabVIEW

This FDP cum STP will be an eye opener for the faculties as well as the students those who are interested working on virtual instrumentation which nowadays in industry vastly used. As NI is one of the leading company who uses new technology and also LabVIEW and NI DAQs which are very popular in industries as well as academics and research.

Topics Covered:

  • Basic Concept of Virtual Instrumentation
  • Familiarization with LabVIEW Software(Front Panel, Block Diagram, Executing Vis, use of different types programming structure like Sequence Structure, Case Structure, For Loop, While Loop, Event Structure etc.)
  • Different labview features like Local Variable, Global Variable, Shared Variable, SubVI, report generation tools, State Machine)
  • Concept of Data Acquisition
  • Real Time Application by Using LabVIEW and NI DAQ
  • NI LabVIEW based Image Processing and Audio Processing Application
  • Industry Standard Real Time Application

Venue: Government College of Engineering and Textile Technology, Berhampore – West Bengal.

Graphical System Design using LabVIEW

This Hands-on training is for Students who are new to the LabVIEW programming Environment. The training will be from basic concepts of LabVIEW to Data Acquisition and control system.

Topics Covered:

  • Basic LabVIEW programming
  • Data Acquisition

Venue: Sahrdaya College of Engineering, Kerala

Industrial Training Workshop on Virtual Instrumentation using NI LabVIEW

This FDP cum STP will be an eye opener for the faculties as well as the students those who are interested working on virtual instrumentation which nowadays in industry vastly used. As NI is one of the leading company who uses new technology and also LabVIEW and NI DAQs which are very popular in industries as well as academics and research.

Topics Covered:

  • Basic Concept of Virtual Instrumentation
  • Familiarization with LabVIEW Software(Front Panel, Block Diagram, Executing Vis, use of different types programming structure like Sequence Structure, Case Structure, For Loop, While Loop, Event Structure etc.)
  • Different labview features like Local Variable, Global Variable, Shared Variable, SubVI, report generation tools, State Machine)
  • Concept of Data Acquisition
  • Real Time Application by Using LabVIEW and NI DAQ
  • NI LabVIEW based Image Processing and Audio Processing Application
  • Industry Standard Real Time Application

Venue: Aerospace Engineering and Applied Mechanics Dept., Indian Institute of Engineering Science and Technology, Shibpur – West Bengal

Emerging Trends in Power Electronics and Power Systems by using CYME simulation software

Introduction to PSIM and CYME software and their add on modules

Topics Covered:

  • Load Flow study
  • Short Circuit study
  • Voltage stability
  • Transient stability

Venue: Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad

Seminar on Advanced Robotic Control System using Quanser

To increase the awareness of new technologies for Advanced Robotic Control System for academic, research and industry oriented applications nowadays.

Topics Covered:

  • Introduction to Control Systems
  • Linear Motion Control
  • Rotary Motion Control
  • Flight Control Systems Design
  • Robotic and Autonomous Systems
  • Haptic Systems
  • Structural Dynamics and Analysis
  • Industrial Applications and Process Control

Venue: National Institute of Technical Teachers Training and Research, West Bengal

FPGA based Power Measurements and Motion Control using LabVIEW

This FDP is for faculties/research scholars who are working in the field of power measurements, power quality measurements and motion controls. This FDP provides Hands-on LabVIEW programming experience with real-time voltage and current acquisition, controlling different types of motors using dedicated motion control C- series modules and NI FPGA.

Topics Covered:

  • Basic LabVIEW programming
  • Real-time data acquisition and processing
  • Programming FPGA based embedded system

Venue: Rajiv Gandhi Institute of Technology, Kottayam, Kerala

Graphical System Design using LabVIEW

This Hands-on training is for Students and Faculties who are new to the LabVIEW programming Environment. The training will be from basic concepts of LabVIEW to Data Acquisition and control system.

Topics Covered:

  • Basic LabVIEW programming
  • Data Acquisition

Venue: College of Engineering, Cherthala, Kerala

DSP and VLSI Design using Simulation Tools

The objective of this workshop is to upgrade knowledge and skills of the participants in the field of signal processing, VLSI and Microelectronics. The program aims at providing hands on training on Texas Instrument’s DSP Kits and design, simulation and layout of VLSI circuits using Tanner EDA Tools.

Topics Covered:

  • VLSI Technology theory overview
  • Introduction to CMOS
  • Schematic design using S-Edit
  • Overview of SPICE coding
  • NMOS and PMOS layout design
  • SDL Navigation
  • Introduction to Digital Signal Processing
  • VLIW Architecture
  • Signal Generation and Signal Processing

Venue: Guru Nanak Institute of Technology, Kolkata

FDP on Advanced Technologies in Electronics Engineering

This FDP will be an eye opener for the faculties those who are working on real time data acquisition. This FDP also introduces the industry standard Biomedical, Mechatronics system and reconfigurable systems using LabVIEW and associated Hardware.

Topics Covered:

  • LabVIEW Software applications
  • Real time Biomedical data acquisition using sensors
  • Introduction to Reconfigurable I/O Hardware for Robotics/Mechatronics Applications
  • Image Processing using NI Smart Camera

Venue: Sardar Patel Institute of Technology, Mumbai

FDP on RF and Antenna Design

This session will cover architecture of Microstrip antenna design, gerber file for fabrication, dipole, helical, stack array design, microstrip and stripline filters design using Hyperlynx3DEM (IE3D). Faculties from various institutes of Mumbai university will be participating in this FDP.

Topics Covered:

  • Introduction to ie3d
  • Design and simulation of micro strip patch
  • Optimization in ie3d
  • Use of fast EM kit in ie3d
  • Design and analysis of power divider or coupler

Venue: Sardar Patel Institute of Technology, Mumbai

FDP on Emerging Trends in Design and Simulation Technologies

This FDP will be an eye opener for the faculty members that are working on multi body dynamics based simulation and analysis area. This FDP also introduces the industry standard Multi Body Dynamics Simulation Software Simulation-X. This tool also helps us, in real time simulation in the field of Computer Aided Engineering (CAE).

Topics Covered:

  • What is Multi Body Dynamics, Simulation-X?
  • Various Modules available in Simulation-X and their applications
  • Real Time Simulation steps
  • Simulating the Design as per Anna University for Simulation and Analysis lab

Venue: Madras Institute of Technology (MIT), Chromepet, Chennai

FDP on Embedded Systems, Digital Signal Processing and Image Processing

This FDP will give an awareness on Embedded Systems, Signal Processing and Image Processing. The world brand Texas Instruments hardware will be used for the technical presentations. This also helps the faulty members to train the students with the latest hardware and software configurations to keep the students up to date in the technology front.

Topics Covered:

  • What is ARM, Embedded System?
  • Real World Applications and Interfaces
  • End to End Design
  • What is Digital Signal Processing, Image Processing?

Venue: Seminar Hall, ECE Department, RVS College of Engineering and Technology, Coimbatore