- Comparison between MIL HBDK -217 FN2 and 217 Plus in Reliability Prediction
- Virtual Instrumentation Workshop - 22nd March to 24th March
- Graphical System Design - 21st March to 23rd March
- Windchill Risk and Reliability Seminar 2017 to be held on March 23, 2017.
- Virtual Instrumentation Workshop - 18th March to 19th March
- Emerging Trends in Power Electronics & Power Systems - 23rd February
- Past Events
- Event Registration
Comparison between MIL HBDK -217 FN2 and 217 Plus in Reliability Prediction
Date and Time : May 25, 2017 at 4 pm
Duration : 45 Min
Presented by : N. Aravinth – Sr. Application Engineer- Reliability
About this Webinar:
The failure rate models of 217Plus are more than updated MIL-HDBK-217 models. They are restructured to be more accurate by enhanced approaches to accounting for environments, for quality, and for cycling effects on reliability. The methodology also allows users to combine its models with their own experience data in a Bayesian type approach.
Please Register through mail“ manjula.s@tridenttechlabs.com
Industrial Training Workshop on Virtual Instrumentation using NI LabVIEW
This FDP cum STP will be an eye opener for the faculties as well as the students those who are interested working on virtual instrumentation which nowadays in industry vastly used. As NI is one of the leading company who uses new technology and also LabVIEW & NI DAQs which are very popular in industries as well as academics & research.
Topics Covered:
Basic Concept of Virtual Instrumentation
Familiarization with LabVIEW Software(Front Panel, Block Diagram, Executing Vis, use of different types programming structure like Sequence Structure, Case Structure, For Loop, While Loop, Event Structure etc.)
Different labview features like Local Variable, Global Variable, Shared Variable, SubVI, report generation tools, State Machine)
Concept of Data Acquisition
Real Time Application by Using LabVIEW and NI DAQ
NI LabVIEW based Image Processing and Audio Processing Application
Industry Standard Real Time Application
Venue: Government College of Engineering & Textile Technology, Berhampore – West Bengal.
Date and Time: 22nd – 24th March 2016, 10:00AM onwards
Graphical System Design using LabVIEW
This Hands-on training is for Students who are new to the LabVIEW programming Environment. The training will be from basic concepts of LabVIEW to Data Acquisition and control system.
Topics Covered:
Basic LabVIEW programming
Data Acquisition
Venue: Sahrdaya College of Engineering, Kerala
Date and Time: 21st to 23rd March, 2016
Industrial Training Workshop on Virtual Instrumentation using NI LabVIEW
This FDP cum STP will be an eye opener for the faculties as well as the students those who are interested working on virtual instrumentation which nowadays in industry vastly used. As NI is one of the leading company who uses new technology and also LabVIEW & NI DAQs which are very popular in industries as well as academics & research.
Topics Covered:
Basic Concept of Virtual Instrumentation
Familiarization with LabVIEW Software(Front Panel, Block Diagram, Executing Vis, use of different types programming structure like Sequence Structure, Case Structure, For Loop, While Loop, Event Structure etc.)
Different labview features like Local Variable, Global Variable, Shared Variable, SubVI, report generation tools, State Machine)
Concept of Data Acquisition
Real Time Application by Using LabVIEW and NI DAQ
NI LabVIEW based Image Processing and Audio Processing Application
Industry Standard Real Time Application
Venue: Aerospace Engineering & Applied Mechanics Dept., Indian Institute of Engineering Science & Technology, Shibpur – West Bengal
Date and Time: 18th – 19th March 2016, 10:30AM onwards
Emerging Trends in Power Electronics & Power Systems by using CYME simulation software
Introduction to PSIM and CYME software and their add on modules
Topics Covered:
Load Flow study
Short Circuit study
Voltage stability
Transient stability
Venue: Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad
Date and Time: 23rd February 2016
Seminar on Advanced Robotic Control System using Quanser
To increase the awareness of new technologies for Advanced Robotic Control System for academic, research & industry oriented applications nowadays.
Topics Covered:
Introduction to Control Systems
Linear Motion Control
Rotary Motion Control
Flight Control Systems Design
Robotic and Autonomous Systems
Haptic Systems
Structural Dynamics and Analysis
Industrial Applications and Process Control
Venue: National Institute of Technical Teachers Training & Research, West Bengal
Date and Time: 16th February 2016, 11:00 AM onwards
FPGA based Power Measurements and Motion Control using LabVIEW
This FDP is for faculties/research scholars who are working in the field of power measurements, power quality measurements and motion controls. This FDP provides Hands-on LabVIEW programming experience with real-time voltage and current acquisition, controlling different types of motors using dedicated motion control C- series modules and NI FPGA.
Topics Covered:
Basic LabVIEW programming
Real-time data acquisition and processing
Programming FPGA based embedded system
Venue: Rajiv Gandhi Institute of Technology, Kottayam, Kerala
Date and Time: 25th to 29th January, 2016
Graphical System Design using LabVIEW
This Hands-on training is for Students and Faculties who are new to the LabVIEW programming Environment. The training will be from basic concepts of LabVIEW to Data Acquisition and control system.
Topics Covered:
Basic LabVIEW programming
Data Acquisition
Venue: College of Engineering, Cherthala, Kerala
Date and Time: 11th to 16th January, 2016
DSP & VLSI Design using Simulation Tools
The objective of this workshop is to upgrade knowledge and skills of the participants in the field of signal processing, VLSI and Microelectronics. The program aims at providing hands on training on Texas Instrument’s DSP Kits and design, simulation and layout of VLSI circuits using Tanner EDA Tools.
Topics Covered:
VLSI Technology theory overview
Introduction to CMOS
Schematic design using S-Edit
Overview of SPICE coding
NMOS and PMOS layout design
SDL Navigation
Introduction to Digital Signal Processing
VLIW Architecture
Signal Generation & Signal Processing
Venue: Guru Nanak Institute of Technology, Kolkata
Date and Time: 11th to 15th January, 2016
Graphical System Design using LabVIEW
This Hands-on training is for Faculties and Research Scholars who are new to the LabVIEW programming Environment. The training will be from basic concepts of LabVIEW to Data Acquisition and control system.
Topics Covered:
Basic LabVIEW programming
Data Acquisition
Embedded System
Venue: College of Engineering, Kidagoor, Kerala
Date and Time: 4th to 8th January, 2016
FDP on Advanced Technologies in Electronics Engineering
This FDP will be an eye opener for the faculties those who are working on real time data acquisition. This FDP also introduces the industry standard Biomedical, Mechatronics system and reconfigurable systems using LabVIEW and associated Hardware.
Topics Covered:
LabVIEW Software applications
Real time Biomedical data acquisition using sensors
Introduction to Reconfigurable I/O Hardware for Robotics/Mechatronics Applications
Image Processing using NI Smart Camera
Venue: Sardar Patel Institute of Technology, Mumbai
Date and Time: 30th November to 5th December
FDP on RF and Antenna Design
This session will cover architecture of Microstrip antenna design, gerber file for fabrication, dipole, helical, stack array design, microstrip and stripline filters design using Hyperlynx3DEM (IE3D). Faculties from various institutes of Mumbai university will be participating in this FDP.
Topics Covered:
Introduction to ie3d
Design and simulation of micro strip patch
Optimization in ie3d
Use of fast EM kit in ie3d
Design and analysis of power divider or coupler
Venue: Sardar Patel Institute of Technology, Mumbai
Date and Time: 23rd November
FDP on Emerging Trends in Design & Simulation Technologies
This FDP will be an eye opener for the faculty members that are working on multi body dynamics based simulation & analysis area. This FDP also introduces the industry standard Multi Body Dynamics Simulation Software Simulation-X. This tool also helps us, in real time simulation in the field of Computer Aided Engineering (CAE).
Topics Covered:
What is Multi Body Dynamics, Simulation-X?
Various Modules available in Simulation-X and their applications
Real Time Simulation steps
Simulating the Design as per Anna University for Simulation & Analysis lab
Venue: Madras Institute of Technology (MIT), Chromepet, Chennai
Date and Time: 10th October, 9:30AM
FDP on Embedded Systems, Digital Signal Processing & Image Processing
This FDP will give an awareness on Embedded Systems, Signal Processing and Image Processing. The world brand Texas Instruments hardware will be used for the technical presentations. This also helps the faulty members to train the students with the latest hardware & software configurations to keep the students up to date in the technology front.
Topics Covered:
What is ARM, Embedded System?
Real World Applications & Interfaces
End to End Design
What is Digital Signal Processing, Image Processing?
Venue: Seminar Hall, ECE Department, RVS College of Engineering & Technology, Coimbatore
Date and Time: 26th September, 9AM