Student Training | Techlabs
Student Training

Student Training

In India, Engineering and Research & Development Services (ER&D) industry is emerging with a growth rate of over 30% every year, giving unbound opportunities to prospective engineers. The rapidly changing market landscape in western countries has created demand for skilled engineering workforce with excellent knowledge and experience of latest technology. The limited exposure that students get at their Techincal Institutes has created a huge shortfall of skilled engineering manpower for the industry. Techlabs training division is continuously striving to empower aspiring engineers through strategically-designed programs which give students a competitive edge that they need to establish themselves as successful professionals in today’s technology-driven competitive world. Through our on-site training programs, we provide student a hardcore-technical live experience of working on state-of-the art techniques and tools.

  • Introduction to Digital Signal Processing
  • Introduction to TI based DSP
  • Introduction to general Architecture on C6000 families
  • Advanced architecture associated with DSP platform
  • Audio Architecture (Codec’s) applications using DSP processor Part I
  • Audio Architecture (Codec’s) applications using DSP processor Part II
  • Advanced Architecture associated with DSP platform
  • Hands-on session Arithmetic Adder, Multiplier
  • Hands-on session Design of Filters (FIR, IIR)
  • Feasibility of DSP Processor with 3rd party software
  • Project Session

askourexperts
enrolnow
  • Introduction to Embedded System
  • Overview of Embedded technology & ultralow power Microcontrollers with Value added
  • Advanced architecture associated with MSP430 value line & development boards
  • Programming GPIO Concepts
  • Programming-Interrupt concepts
  • Programming PWM Generation
  • Hands-on with WDT in MSP 430
  • Programming Serial Communication using UART
  • Programming Analog to Digital conversion using UART
  • Concept and Introduction to Embedded C
  • Project Session

askourexperts
enrolnow
  • Introduction to LabVIEW
  • Working with Instrumentation Amplifier in LabVIEW
  • Testing RC Circuits with Function Generator & Oscilloscope
  • Working with Op-Amp Circuits in LabVIEW
  • Experiments on AC voltage & Current Parameters
  • Transient Phenomenon in RC, RL & RLC Networks
  • Serial Connection Concepts using LabVIEW
  • Working with Microphones using NI DAQ
  • Hands-on Session on LabVIEW

askourexperts
enrolnow
  • Introduction to LabVIEW
  • Working with Instrumentation Amplifier in LabVIEW
  • Working with Op-Amp Circuits in LabVIEW
  • Experiments on AC Voltage & Current Parameters
  • Closed Loop Analysis using NI ELVIS & DC Motor
  • Control & Testing Using NI DAQ
  • Simulation of Synchronous Machine Measurement
  • Generator Synchronization
  • Basic Power Systems

askourexperts
enrolnow
  • Introduction to VisSim
  • Introduction to Modulation Techniques
  • Digital Communication System Design
  • Real-Time Analog & Digital Data I/O
  • Hands-on Session in VisSim
  • Hands-on Session on VisSim / Comm.
  • Introduction to LabVIEW
  • Working with Instrumentation Amplifier, Op-Amplifier in LabVIEW
  • Working with LabVIEW
  • Serial Connection Concepts using LabVIEW
  • Working with Microphone using NIDAQ
  • Hands-on Session in LabVIEW

askourexperts
enrolnow
  • Introduction to PSIM
  • Time domain & Frequency domain Simulation
  • AC Drive , DC Drive –Design Simulation
  • Controllers to special tools
  • Working with renewable and Simcoupler module
  • Hands-on Session in PSIM
  • Introduction to other module in PSIM Modulation Techniques &sensors
  • Design of three-phase induction motor design in Techmo software
  • Design of DC machine design in Techmo software
  • Single and three-phase transformer design in Techtran Software
  • Hands-on Session in Techmo & Techtran

askourexperts
enrolnow
  • Introduction to Power world Simulator
  • Editing & Analyzing of a case in Power  World
  • Power Flow analysis & Voltage Control
  • Generator & Area Power Control limit monitoring
  • Contingency Analysis & Fault Analysis
  • Hands-on Session in Power World Simulator
  • Introduction to CYME Software
  • Working with Power Flow Simulations
  • Working with CYME CYHARMO Module
  • AC Contingency Analysis
  • Voltage Stability

askourexperts
enrolnow
  • CMOS Fundamentals
  • CMOS Circuit Design
  • CMOS Processing Steps
  • Digital Vs Analog
  • Schematic & Layout Design demo
  • Schematic Design & Simulation- CMOS inverter
  • Layout Design and Simulation – CMOS inverter
  • DC Analysis, Frequency Domain Analysis, Time Domain
  • Transistor Sizing – Technology dependency
  • Layout & Stick Diagrams – NAND, NOR, XOR, XNOR, Gate Design
  • Schematic Design & Simulation Lab: CMOS, NAND, NOR, XOR & XNOR Gates
  • Layout Design & Simulation Lab: CMOS, NAND, NOR, XOR & XNOR Gates
  • Low Power Design Concept
  • CMOS Technology – Current Trends
  • Introduction to FINFET Fundamentals
  • Tools and Trends
  • Basics of Operating System and Fundamentals

askourexperts
enrolnow
  • VLSI Design Flow
  • ASIC v/s FPGA
  • RTL Design Methodologies
  • Introduction to ASIC verification methodologies
  • FPGA Architecture: Introduction to PLD – Xilinx CPLD,FPGA & Spartan 3
  • VHDL/Verilog HFDL RTL Coding& Synthesis
  • Design of basic gate, adder, counter program Lab
  • Test bench writing, simulation & debug Lab
  • Advanced Digital Design
  • Sequence detector using FSM design Lab
  • ALU design using sequential and combination design lab
  • Static Timing Analysis – Introduction and importance
  • Mini Project Explaination
  • Concept of Synthesis
  • Tools and Trends
  • Basics of Operating System and Fundamentals

askourexperts
enrolnow
  • Overview of Computer Aided Design/Drafting
  • Part Modelling & Sheet Modelling
  • Assembly Advanced 3D Modelling & Mechanics
  • Overview of Computer Aided Manufacturing
  • Analysis & Simulation
  • Drafting, Detailing & Drawing

askourexperts
enrolnow

Techlabs Advantage
  • Hands on Experience with Latest Technology
  • Opportunity to learn from Industry Veterans
  • Interactive Training Sessions with Live Demos
  • Highly Sought-After Engineering Skills
  • Lucrative Job Prospects and Career Options
  • Expert Counselling and Focused Mentoring
  • State of the Art Techniques and Tools
  • Rich and Dynamic Multimedia Courseware
  • On-Site Training Programmes and Sessions

Student-Training
faculty-development
prof-courses